orthanc: Resources/Orthanc.doxygen comparison

comparison Resources/Orthanc.doxygen @ 759:8cfc6119a5bd dicom-rt

integration mainline -> dicom-rt

author	Sebastien Jodogne <s.jodogne@gmail.com>
date	Wed, 16 Apr 2014 16:04:55 +0200
parents	f0232774b913
children	6ed49334d5c1

comparison

equal deleted inserted replaced

-:b82292ba2083
+:8cfc6119a5bd
-# Doxyfile 1.7.4
+# Doxyfile 1.8.1.2
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
 #
 # All text after a hash (#) is considered a comment and will be ignored.
 # iconv built into libc) for the transcoding. See
 # http://www.gnu.org/software/libiconv for the list of possible encodings.
 DOXYFILE_ENCODING      = UTF-8
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
-# by quotes) that should identify the project.
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
 PROJECT_NAME           = Orthanc
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
 # will result in a user-defined paragraph with heading "Side Effects:".
 # You can put \n's in the value part of an alias to insert newlines.
 ALIASES                =
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+TCL_SUBST              =
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
 # sources only. Doxygen will then generate output that is more tailored for C.
 # For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
 # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
 EXTENSION_MAPPING      =
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+MARKDOWN_SUPPORT       = YES
 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
 # to include (a tag file for) the STL sources as input, then you should
 # set this tag to YES in order to let doxygen match functions declarations and
 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
 # func(std::string) {}). This also makes the inheritance and collaboration
 # unions are shown inside the group in which they are included (e.g. using
 # @ingroup) instead of on a separate page (for HTML and Man pages) or
 # section (for LaTeX and RTF).
 INLINE_GROUPED_CLASSES = NO
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+INLINE_SIMPLE_STRUCTS  = NO
 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
 # is documented as struct, union, or enum with the name of the typedef. So
 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
 # with name TypeT. When disabled the typedef will appear as a member of a file,
 # If the system has enough physical memory increasing the cache will improve the
 # performance by keeping more symbols in memory. Note that the value works on
 # a logarithmic scale so increasing the size by one will roughly double the
 # memory usage. The cache size is given by this formula:
 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
+# corresponding to a cache size of 2^16 = 65536 symbols.
 SYMBOL_CACHE_SIZE      = 0
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+LOOKUP_CACHE_SIZE      = 0
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 EXTRACT_PRIVATE        = NO
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+EXTRACT_PACKAGE        = NO
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 EXTRACT_STATIC         = NO
 # at the bottom of the documentation of classes and structs. If set to YES the
 # list will mention the files that were used to generate the documentation.
 SHOW_USED_FILES        = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-SHOW_DIRECTORIES       = NO
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
 SHOW_FILES             = YES
 FILE_VERSION_FILTER    =
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
 LAYOUT_FILE            =
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+CITE_BIB_FILES         =
 #---------------------------------------------------------------------------
 # configuration options related to warning and progress messages
 #---------------------------------------------------------------------------
 # The INPUT tag can be used to specify the files and/or directories that contain
 # documented source files. You may enter file names like "myfile.cpp" or
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
-INPUT                  =  @CMAKE_SOURCE_DIR@/Core @CMAKE_SOURCE_DIR@/OrthancServer @CMAKE_SOURCE_DIR@/OrthancCppClient
+INPUT                  = @CMAKE_SOURCE_DIR@/Core \
+@CMAKE_SOURCE_DIR@/OrthancServer \
+@CMAKE_SOURCE_DIR@/OrthancCppClient
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
 # also the default input encoding. Doxygen uses libiconv (or the iconv built
 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
 # should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 RECURSIVE              = YES
-# The EXCLUDE tag can be used to specify files and/or directories that should
+# The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
 EXCLUDE                =
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
 # from the input.
 EXCLUDE_SYMLINKS       = NO
 INLINE_SOURCES         = NO
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 STRIP_CODE_COMMENTS    = YES
 # If the REFERENCED_BY_RELATION tag is set to YES
 # then for each documented function all documented
 HTML_FILE_EXTENSION    = .html
 # The HTML_HEADER tag can be used to specify a personal HTML header for
 # each generated HTML page. If it is left blank doxygen will generate a
 # standard header. Note that when using a custom header you are responsible
-# for the proper inclusion of any scripts and style sheets that doxygen
+#  for the proper inclusion of any scripts and style sheets that doxygen
 # needs, which is dependent on the configuration options used.
-# It is adviced to generate a default header using "doxygen -w html
+# It is advised to generate a default header using "doxygen -w html
 # header.html footer.html stylesheet.css YourConfigFile" and then modify
 # that header. Note that the header is subject to change so you typically
-# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW!
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
 HTML_HEADER            =
 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
 # each generated HTML page. If it is left blank doxygen will generate a
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
 # style sheet that is used by each HTML page. It can be used to
 # fine-tune the look of the HTML output. If the tag is left blank doxygen
 # will generate a default style sheet. Note that doxygen will try to copy
 # the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
+# style sheet in the HTML output directory as well, or it will be erased!
 HTML_STYLESHEET        =
 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
 # other source files which should be copied to the HTML output directory. Note
 # the files will be copied as-is; there are no commands or markers available.
 HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the stylesheet and background images
+# Doxygen will adjust the colors in the style sheet and background images
 # according to this color. Hue is specified as an angle on a colorwheel,
 # see http://en.wikipedia.org/wiki/Hue for more information.
 # For instance the value 0 represents red, 60 is yellow, 120 is green,
 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
 # The allowed range is 0 to 359.
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 HTML_TIMESTAMP         = YES
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-HTML_ALIGN_MEMBERS     = YES
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
+# page has loaded.
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 HTML_DYNAMIC_SECTIONS  = NO
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+HTML_INDEX_NUM_ENTRIES = 100
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
 # To create a documentation set, doxygen will generate a Makefile in the
 # the directory name containing the HTML and XML files should also have
 # this name.
 ECLIPSE_DOC_ID         = org.doxygen.Project
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
-# top of each HTML page. The value NO (the default) enables the index and
+# at top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
 DISABLE_INDEX          = NO
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
-# (range [0,1..20]) that doxygen will group on one line in the generated HTML
-# documentation. Note that a value of 0 will completely suppress the enum
-# values from appearing in the overview section.
-ENUM_VALUES_PER_LINE   = 1
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
 # If the tag value is set to YES, a side panel will be generated
 # containing a tree-like index structure (just like the one that
 # is generated for HTML Help). For this to work a browser that supports
 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
 # Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
 GENERATE_TREEVIEW      = NO
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
-# and Class Hierarchy pages using a tree view instead of an ordered list.
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
-USE_INLINE_TREES       = NO
+# values from appearing in the overview section.
+ENUM_VALUES_PER_LINE   = 1
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
 # (see http://www.mathjax.org) which uses client side Javascript for the
 # rendering instead of using prerendered bitmaps. Use this if you do not
 # have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you also need to install MathJax separately and
+# output. When enabled you may also need to install MathJax separately and
 # configure the path to it using the MATHJAX_RELPATH option.
 USE_MATHJAX            = NO
 # When MathJax is enabled you need to specify the location relative to the
 # HTML output directory using the MATHJAX_RELPATH option. The destination
 # directory should contain the MathJax.js script. For instance, if the mathjax
 # directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
-# mathjax.org site, so you can quickly see the result without installing
+# the MathJax Content Delivery Network so you can quickly see the result without
-# MathJax, but it is strongly recommended to install a local copy of MathJax
+# installing MathJax.
-# before deployment.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
 MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+MATHJAX_EXTENSIONS     =
 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
 # for the HTML output. The underlying search engine uses javascript
 # and DHTML and should work on any modern browser. Note that when using
 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
 # Note that which sources are shown also depends on other settings
 # such as SOURCE_BROWSER.
 LATEX_SOURCE_CODE      = NO
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+LATEX_BIB_STYLE        = plain
 #---------------------------------------------------------------------------
 # configuration options related to the RTF output
 #---------------------------------------------------------------------------
 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
 # programs which support those fields.
 # Note: wordpad (write) and others do not support links.
 RTF_HYPERLINKS         = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# Load style sheet definitions from file. Syntax is similar to doxygen's
 # config file, i.e. a series of assignments. You only have to provide
 # replacements, missing definitions are set to their default value.
 RTF_STYLESHEET_FILE    =
 #---------------------------------------------------------------------------
 # Configuration::additions related to external references
 #---------------------------------------------------------------------------
-# The TAGFILES option can be used to specify one or more tagfiles.
+# The TAGFILES option can be used to specify one or more tagfiles. For each
-# Optionally an initial location of the external documentation
+# tag file the location of the external documentation should be added. The
-# can be added for each tagfile. The format of a tag file without
+# format of a tag file without this location is as follows:
-# this location is as follows:
 #
 # TAGFILES = file1 file2 ...
 # Adding location for the tag files is done as follows:
 #
 # TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
+# where "loc1" and "loc2" can be relative or absolute paths
-# URLs. If a location is present for each tag, the installdox tool
+# or URLs. Note that each tag file must have a unique name (where the name does
-# does not have to be run to correct the links.
+# NOT include the path). If a tag file is not located in the directory in which
-# Note that each tag file must have a unique name
+# doxygen is run, you must also specify the path to the tagfile here.
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
 TAGFILES               =
 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
 # a tag file that is based on the input files it reads.
 # explicitly to a value larger than 0 to get control over the balance
 # between CPU load and processing speed.
 DOT_NUM_THREADS        = 0
-# By default doxygen will write a font called Helvetica to the output
+# By default doxygen will use the Helvetica font for all dot files that
-# directory and reference it in all dot files that doxygen generates.
+# doxygen generates. When you want a differently looking font you can specify
-# When you want a differently looking font you can specify the font name
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
-# using DOT_FONTNAME. You need to make sure dot is able to find the font,
+# the font, which can be done by putting it in a standard location or by setting
-# which can be done by putting it in a standard location or by setting the
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# directory containing the font.
-# containing the font.
 DOT_FONTNAME           = Helvetica
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
 DOT_FONTSIZE           = 10
-# By default doxygen will tell dot to use the output directory to look for the
+# By default doxygen will tell dot to use the Helvetica font.
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
-# different font using DOT_FONTNAME you can set the path where dot
+# set the path where dot can find it.
-# can find it using this tag.
 DOT_FONTPATH           =
 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
+# CLASS_DIAGRAMS tag to NO.
 CLASS_GRAPH            = YES
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
 # Language.
 UML_LOOK               = NO
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+UML_LIMIT_NUM_FIELDS   = 10
 # If set to YES, the inheritance and collaboration graphs will show the
 # relations between templates and their instances.
 TEMPLATE_RELATIONS     = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 GRAPHICAL_HIERARCHY    = YES
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 DIRECTORY_GRAPH        = YES
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
-# If left blank png will be used.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
 DOT_IMAGE_FORMAT       = png
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+INTERACTIVE_SVG        = NO
 # The tag DOT_PATH can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found in the path.
 DOT_PATH               =

Mercurial > hg > orthanc

comparison Resources/Orthanc.doxygen @ 759:8cfc6119a5bd dicom-rt