Configuring DICOM TLS

Starting with release 1.9.0, Orthanc supports the encryption of the DICOM protocol using DICOM TLS. This allows the secure exchange of medical images between different sites, even if using the DICOM protocol.

Configuration

To enable DICOM TLS, each DICOM modality must have been assigned with a X.509 certificate. Obtaining such a certificate from a recognized certification authority is obviously out of the scope of the Orthanc project. Here is a simple command-line to generate a self-signed certificate using the OpenSSL command-line tools:

$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
          -keyout orthanc.key -out orthanc.crt -subj "/C=BE/CN=localhost"

Obviously, you must adapt the arguments to your setup (notably the subj argument that generates a certificate for Belgium for the server whose DNS address is localhost). This command line will generate two files using the PEM file format: orthanc.crt is the newly-generated certificate, and orthanc.key contains the private key that protects the certificate. The orthanc.crt can be openly distributed, but orthanc.key must be kept secret (it should only be placed on the modality using the corresponding certificate).

Once orthanc.crt and orthanc.key have been generated, all the modalities that will be in touch with Orthanc (either as SCP or as SCU) through DICOM TLS must be identified, and their public certificates must be collected. All those certificates must be concatenated into a single file in order to tell Orthanc which modalities can be trusted.

Concretely, if one has collected a.crt, b.crt and c.crt as the certificates (in the PEM format) for trusted remote DICOM modalities, a trusted.crt file can be generated as follows:

$ cat a.crt b.crt c.crt > trusted.crt

Once the three files orthanc.crt, orthanc.key and trusted.crt are available, setting the following configuration options will enable DICOM TLS in Orthanc SCP:

  • DicomTlsEnabled must be set to true.

  • DicomTlsCertificate must be set to orthanc.crt.

  • DicomTlsPrivateKey must be set to orthanc.key (note that this private key must not be password-protected).

  • DicomTlsTrustedCertificates must be set to trusted.crt.

If Orthanc acts as a DICOM SCU against one remote DICOM modality, and if this remote modality is protected by DICOM TLS, the UseDicomTls field must be set to true in the definition of the modality in the configuration file of Orthanc (cf. the DicomModalities option). The file indicated by DicomTlsCertificate will be used to authentify Orthanc by the remote modality: This modality must thus include orthanc.crt in its list of trusted certificates.

Remark 1: Pay attention not to confuse the configuration options related to HTTPS encryption, with the options related to DICOM TLS. In Orthanc, HTTPS and DICOM TLS are not obliged to use the same encryption certificates.

Remark 2: Orthanc SCU and Orthanc SCP share the same set of trusted certificates.

Important: DCMTK 3.6.4 seems to have an issue with DICOM TLS, which produces the errors DUL secure transport layer: no suitable signature algorithm (in the DICOM SCP) and DUL secure transport layer: sslv3 alert handshake failure (in the DICOM SCU). This problem is not specific to Orthanc, as it also occurs between two command-line tools of the DCMTK 3.6.4 suite. Make sure to use either DCMTK 3.6.2 or DCMTK 3.6.6. In particular, Debian Buster (10) uses DCMTK 3.6.4 and should be avoided in non-static builds of Orthanc, or if using the DCMTK command-line tools.

Examples

Using DCMTK

Let us generate one certificate for Orthanc, and one certificate for DCMTK:

$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
          -keyout orthanc.key -out orthanc.crt -subj "/C=BE/CN=localhost"
$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
          -keyout dcmtk.key -out dcmtk.crt -subj "/C=BE/CN=localhost"

Let us start Orthanc using the following minimal configuration file:

{
  "DicomTlsEnabled" : true,
  "DicomTlsCertificate" : "orthanc.crt",
  "DicomTlsPrivateKey" : "orthanc.key",
  "DicomTlsTrustedCertificates" : "dcmtk.crt",
  "DicomModalities" : {
    "dmctk" : {
      "Host" : "localhost",
      "Port" : 4242,
      "AET" : "DCMTK",
      "UseDicomTls" : true
    }
  }
}

It is then possible to trigger a secure C-ECHO SCU request from DCMTK to Orthanc as follows:

$ echoscu -v -aet DCMTK localhost 4242 +tls dcmtk.key dcmtk.crt +cf orthanc.crt
I: Requesting Association
I: Association Accepted (Max Send PDV: 16372)
I: Sending Echo Request (MsgID 1)
I: Received Echo Response (Success)
I: Releasing Association

Using dcm4che

To use the dcm4che command-line tools instead of DCMTK, the two certificates must first be converted from X.509 to PKCS #12:

$ openssl pkcs12 -export -out orthanc.p12 -in orthanc.crt -inkey orthanc.key
$ openssl pkcs12 -export -out dcm4che.p12 -in dcmtk.crt -inkey dcmtk.key

For this example, you can let the Export Password as an empty string in the two calls above. Then, here is how to trigger a secure C-STORE SCU request to send the sample.dcm file from dcm4che to Orthanc:

$ ~/Downloads/dcm4che-5.23.3/bin/storescu -c ORTHANC@localhost:4242 --tls \
 --trust-store ./orthanc.p12 --key-store ./dcm4che.p12 --trust-store-pass "" --key-store-pass "" sample.dcm

Remarks:

  • The empty strings provided to the --trust-store-pass and --key-store-pass options correspond to the empty strings provided to Export Password.

  • Disclaimer: In this setup, orthanc.p12 contains the private key of the Orthanc server. It is unclear how to remove this private key that should be unknown to the DICOM client for security reasons.

Secure TLS connections without certificate

In Orthanc <= 1.9.2, the remote DICOM modalities are required to provide a valide DICOM TLS certificate (which corresponds to the default --require-peer-cert option of the DCMTK command-line tools).

Starting from Orthanc 1.9.3, it is possible to allow connections to/from remote DICOM modalities that do not provide a DICOM TLS certificate (which corresponds to the --ignore-peer-cert option of DCMTK). This requires setting the configuration option DicomTlsRemoteCertificateRequired of Orthanc to false. Note: between Orthanc 1.9.3 and Orthanc 1.12.3 included, this option was actually equivalent to --verify-peer-cert.

As an example, let us generate one single certificate that is dedicated to Orthanc:

$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
          -keyout orthanc.key -out orthanc.crt -subj "/C=BE/CN=localhost"

Let us start Orthanc using the following minimal configuration file:

{
  "DicomTlsEnabled" : true,
  "DicomTlsCertificate" : "orthanc.crt",
  "DicomTlsPrivateKey" : "orthanc.key",
  "DicomTlsRemoteCertificateRequired" : false
}

It is then possible to connect to Orthanc without SCU certificate as follows:

$ echoscu -v localhost 4242 --anonymous-tls +cf /tmp/k/orthanc.crt
I: Requesting Association
I: Association Accepted (Max Send PDV: 16372)
I: Sending Echo Request (MsgID 1)
I: Received Echo Response (Success)
I: Releasing Association